4701-40 Hka htung n-gun rawng ai hka htung|N-gun ja ai -hpyen n-gun -sakse hkam ai pat shingdang ai arung arai - tengman ai Rogers - STK
STK's Genuine Rogers PORON 4701-40 is a high-performance, soft double-sided microcellular polyurethane foam. Dai hta, n hten n run lu ai kaji kajaw hka hpawk ni zawn galaw ai, wan hku law ai, ngang ngang kang kang pat da ai nbung cell ni hte hpring chyat nga ai.
Bat loi mi na ai hpang, n-gun n rawng ai packaging foam ni hte n bung ai sha, PORON 4701-40 gaw aten galu n-gun rawng ai hte shock hpe makawp maga na matu engineering galaw da ai. Shi gaw n-gun n rawng ai hku nga nga ai, ra ai madi shadaw ai lam hte sha nhtang shadut ya ai, electronic jak ni hte wan n-gun panel ni kata na ga yun, n-gun rawng ai, nhtoi a n-gun hpe hkum tsup ai, prat tup pat shingdang ya ai.
Anhte a Stock Nnan Ga Sadi :Polyurethane foam ni hpe mau hpa n-gun hpe n-gun n-htum hkra n-gun n-htum hkra n-gun n-htum hkra tawn da ra ai. Anhte gaw Rogers PORON 4701-40 hpun npawt nhpang yawng hpe anhte a nbung katsi ai-htuk manu ai, san seng ai sutdek kata kaw tawn da ga ai. Anhte gaw 100% tengman ai brand lineage hpe kam hpa ga ai, htum mat sai (sh) asak kaba sai stock n lawm ai.
Tatut akyu ni
Shinggan na wan n-gun box, lata hte lang ai jak ni, mawdaw ni hta madun da ai screen ni hpe design galaw ai rai yang, n-gun kya ai foam gaw, na a circuit ni hpe ga nhpu ni jahten kau ya na re. Ndai kaw PORON 4701-40 gaw hpa majaw hkum tsup ai lata la ai lam re:
Galoi mung n-gun n rawng ai (Mau hpa n-gun-Back):Ndai gaw shi a kaba dik htum n-gun atsam rai nga ai. Ndai foam hpe ngang ngang pat da ai chyinghka (sh) shingnip kata de shaning law law shinggrup da tim, nang hpaw dat ai shaloi, shi a shawng na n-gun de bai nhtang wa nna, dai dazik gaw galoi mung n hkrat sum na hpe kam mai ai.
100% Ga hte Nbung hpe pat shingdang ai:Nbung n shang ai bunghku hpe hpaw ya ai. Kachyi mi sha shinggrup dat yang, n bung ai magri (sh) plastic gap ni de hkum tsup hkra shinggrup kau ya nna, n-gun ja ai nhprang arai, nhprang arai, nbung n-gun hpe na a hkam sha chye ai jak a shinggan de tsep kawp tawn da ya ai.
N-gun n rawng ai (sh) Powder n galaw ai:Manu n-htuk ai foam ni gaw, aten kadun laman hta, n-gun n rawng ai sticky powder byin mat nna, na a optics (sh) screen ni hpe jahten kau ya ai. PORON 4701-40 gaw n kam sham ai daram san seng ai, ngang kang ai, aten na wa ai hte maren n htum mat na re.
Drops kaw na Screen ni hpe makawp maga ya ai:Impact ni hpe tsawm htap hkra hkam la lu ai. Device langai hkrat mat ai (sh) matut manoi jak hte shamu shamawt hkrum ai shaloi, soft foam matrix gaw shamu shamawt ai lam hpe rim la nna, glass display ni hte camera module ni hpe n hkrat sum hkra hkye la lu ai.
TDS
|
A RAI |
CHYAM AI LADAW |
MANU TAWN AI |
|
GAWNG SHINGYANG |
||
|
N-gun ja ai, kg/m3 (lb./ft3) |
ASTM D3574-95, chyam dinglik ai lam A |
240 (15) |
|
Hkam sharing ai lam, % |
± 10 |
|
|
N-gun ja ai, mm |
1.4 – 3.0 |
|
|
Hkam sharing ai lam, % |
± 10 |
|
|
Madang masat masa (Code) |
Hpraw ai (04) |
|
|
N-gun shayawm ai lam, |
0.51 cm/min (0.2"/min). N-gun n-gun |
27 – 55 (4.0 - 8.0) |
|
Kalang lang kPa (psi) |
N-gun shadawn ai @ 20% htingnut ai |
40.6 (5.9) |
|
N-gun shadawn ai @ 25% htingnut ai |
44.5 (6.5) |
|
|
N-gun shadawn ai @ 30% htingnut ai |
49.1 (7.1) |
|
|
N-gun shadawn ai @ 40% htingnut ai |
60.8 (8.8) |
|
|
N-gun shadawn ai @ 50% htingnut ai |
81.5 (11.8) |
|
|
N-gun shadawn ai @ 60% htingnut ai |
127 (18.5) |
|
|
N-gun shadawn ai @ 70% htingnut ai |
264 (38.4) |
|
|
N-gun ja ai, Durometer, Hka Hkin-gau O |
ASTM D2240-97 |
12 |
|
Hka Hkin-gau A |
8 |
|
|
Hkrang shapraw ai Set, % max. |
ASTM D3574-95 Chyam dinglik D @ 23℃(73℃F) |
5 |
|
ASTM D3574-95 Chyam dinglik D @ 70℃(158℃F) |
10 |
|
|
ASTM D3574-95 chyam dinglik ai lam J/chyam dinglik ai lam D |
5 |
|
|
Dimensional ngang grin ai lam, % max. galai shai ai |
22 hrs @ 80℃(176℃F) hpe atik anang-nbung wan wut ai shara kaw |
± 1 |
|
N-gun atsam, min. kPa, (psi) |
ASTM D3574-75 chyam dinglik ai lam E |
276 (40) |
|
N-gun galu ai lam, % min., |
ASTM D3574-75 chyam dinglik ai lam E |
100 |
|
Myi prwi n-gun, kN/m (pli) min |
ASTM D264-91 si ai C |
0.5 (3) |
|
WAN LAM HTE THRMAL |
||
|
Wan n-gun n galai shai ai, K' ("DK") |
ASTM D150 shadawn ai lam ni gaw 22℃(72℃F) |
1.71 |
|
Wan n-gun n-gun, kN/m (volt/mil) |
ASTM D149-97a |
1969 (50) |
|
Hprawng mat ai lam, tan D ("DF") |
ASTM D150-98 |
0.05 |
|
Nsen n-gun hpe ninghkap lu ai atsam, ohmcm (ohm1in) |
ASTM D257-99 |
1 x 10¹² |
Shawk shawn ai:
Lata hte lang ai Electronic shingnip ni:N-gun ja ai smartphone, tsi mawan tablet, barcode scanner ni a screen grup yin hta makawp maga ya ai nhprang wan hte shock-hkap la lu ai gasket hpe jaw ya ai.
Mawdaw Screen hte Dash Pads ni:Myit npyaw hpa nsen ni hte nsen ni hpe jahkring kau na matu, shinggrup da ai mawdaw lam madun ai display ni a hpang na gap hpe pat da ai.
Wan jak hpe hkang ai Box Chyinghka Gaskets ni:Hka hte ga nhpu n shang hkra, bungli galaw ai shara ni hpe hkang ai switchgear ni hte shinggan na battery cabinet ni a kata chyinghka ni hpe shinggrup da ai.
Nsen hte ga shaga ai ni hpe garan ginhka ai:Nsen pru ai hte nbung nsen hpe pat shingdang na matu, hpaji rawng ai jak ni kata na speaker kaji ni hte microphone ni hpe shinggrup da ai.
STK Magam Bungli Magam Bungli ni
STK gaw direct industrial arung arai ni hpe galaw shapraw ai jak rung re. Anhte gaw PORON 4701-40 hpe na a galaw shapraw ai line ra ai hkrang hte maren sha sa ya ai:
Tape hpe n-gun jaw ai (-Glue hpe shawng bang da ai):PORON foam a npawt nhpang hta glue n lawm ai. Anhte a san seng ai nta kata na foam backing ntsa de 3M (sh) TESA lahkawng maga na tape ni hpe laminate galaw mai ai majaw, dai gaw peel- hte -stick galaw na matu jin jin rai sai.
Tsaw -Lawan ai hkrak hkrak si ai-Htu ai:Kaji ai n-gun n rawng ai n-gang ni, n-gun n rawng ai n-gang ni (sh) yak hkak ai grup yin shingnip ni ra ai kun? Anhte gaw, laser-sharp n-gup magap ni hte, na a hkrak ai blueprint hkrang ni hpe foam hpe gang je kau na matu, shi hkum shi galaw ai CNC stamping jak ni hpe lang ga ai.
Direct hku nna dut shabra ai Tier manu jahpu:N ra ai buga na hpaga yumga markup ni hpe dawm kau u. Anhte gaw, na a galaw shapraw ai arung arai ni a jahpan (BOM) hpe grai shingjawng lu hkra, direct container-jin jin rai sai, n-gun rawng ai manu jahpu ni hpe jaw ga ai.
Arung arai ni
Hot Tags: poron 4701-40 pu hka htung|wan n-gun hpe pat shingdang ai & cushioning arung arai ni|n-gun ja ai n-gun hpe hkam sharang lu ai n-gun ja ai n-gun, Miwa poron 4701-40 pu n-gun|wan n-gun hpe pat shingdang ai & cushioning arung arai ni|n-gun ja ai shock absorbing foam galaw shapraw ai ni, dut ya ai ni, jak rung
